Wheelchair Securements

Advanced Modifications works with the leading manufacturers for Wheelchair Securement Systems. Offering accessibility and safety solutions, both Q’straint and EZ Lock offer a wide selection of wheelchair docking devices, retractor and anchorage systems, and other accessories that will provide assist you in safe and secure travel.


Q'Straint Products
Q'Straint introduced the world's first fully integrated 4-point wheelchair passenger securement system, the industry standard for more than 25 years. Each component is designed, engineered and tested to work as one cohesive system. In the event of a collision or sudden stop, the system isolates the forward forces of the occupant from those of their chair by directing the chair's forces to the vehicle floor. A complete 4-point system includes: 4 wheelchair restraints to secure wheelchair to the vehicle floor Occupant securements; lap and shoulder belt that integrate to the rear wheelchair restraints Floor anchorages; installed in the vehicle floor Installation and operator instructions Warranty registration card.


QRT Max The latest innovation in retractor systems. The QRT MAX is the latest generation of self-locking and self-tensioning retractable wheelchair securement systems.






QRT Deluxe The retractor that changed the industry. The QRT Deluxe was the first self-locking, self-tensioning retractable wheelchair tie-down system and is now the industry standard.






QRT Standard For a budget-conscious retractor solution. The QRT Standard is an economical, semi-automatic retractor system to help meet minimum specifications and cost-conscious budgets without sacrificing safety.






4m Electric Locking Retractor A worldwide first in electric locking retractors. Q’Straint introduces QER-4000, the world’s first 4m front electrical locking retractor for the easy securement of wheelchairs in vehicles.






M-Series Manual Belts The manual systems are the original 4-point systems which have been tested and used for over 25 years. They use a cam or over-center buckle-design to safely secure wheelchair passengers. A budget-conscious solution. The M-Series is an economical manual securement system to help meet minimum specifications and cost-conscious budgets without sacrificing safety.




QLK-100 Docking System The QLK-100 wheelchair docking system is the perfect solution for wheelchair passengers who drive their vehicles and for those who want the independence of quickly securing their own wheelchair using a single point system.






QLK-150 Docking System The QLK-150 is the next generation of docking systems, designed to improve the user experience with new features and the latest technology.







Slide and Click The latest innovation in fixed securement “pockets”. It offers 360 degree rotation and an easy one-handed operation.








Oval L-Pocket Easy to install, simple to use floor mounted anchorage for L-fittings.








Covered L-PocketFlush mounted floor anchorage for L-fittings, with attached cover.



\




L-Track L-Track is the most widely used floor anchorage in the transportation industry due to its flexibility in accommodating various wheelchair positions.








Accessories We offer various parts and accessories to meet your needs.









EZLock Wheelchair Docking System

For those who rely on their wheelchair as seating in their vehicle; the EZ Lock system is the absolute best solution for travel safety and security.

The EZ Lock Wheelchair Docking System easily secures a wheelchair to the vehicle floor; saving you both time and effort.

Even better, the automatic docking base allows the user to lock the wheelchair into place without the assistance of others. No more struggling to cinch the straps down; no more hassle. We do our best to make it easy for you to meet your mobility needs; whether your driving or just enjoying the ride.

EZ Lock is perfectly suited for both wheelchair seated passengers and drivers. In fact, no other adaptive device provides for more freedom of mobility, or enhances the user's overall level of independence, than the EZ Lock Wheelchair Docking System does.

You can also have confidence that the EZ Lock is a tried and true system, with more than two decades of proven performance. Read some of our customer submitted testimonials here.

At EZ Lock the wheelchair docking system is our specialty. Our focus, coupled with the knowledge and professionalism of our authorized EZ Lock dealers, ensures that you get the finest docking system available.

EZ Lock... Products you can trust; Performance you can count on.

How It Works...

The docking base ready to accept the wheelchair using the EZ Lock Docking System simply requires that you guide your wheelchair into the docking base until the interfacing bracket attached to the wheelchair locks securely into place.

In the photo to the right, we use one of our demonstration units to illustrate the principle of the docking system.

Here, the docking pin attached to the demo “wheelchair” is aligned and ready to engage the docking base.

The “V” shaped structure at the opening of the docking base helps to guide the wheelchair into position.

Locks the Wheelchair Securely into the Docking Base...

Once in position, just pull forward a few inches and the wheelchair engages the docking base. The pin attached to the interface bracket is captured by a pair of steel 1/4” locking levers and is securely held in place by the docking base.wheelchair fully engaged into docking base.

Interface brackets are available for many different wheelchairs, including both power and manual models.

Once the wheelchair is securely locked into the docking base, the dependable ECU-3 electronics monitor your docking status the duration of your trip.

Electronics You Can Count On...EZ Lock touchpad control

Our electronics have a reputation for dependability. The touchpad control has an array of clearly visible indicators to monitor the docking status of the wheelchair, an audible alarm, and large back-lit buttons for release and system deactivation.

The green light indicates the wheelchair is fully engaged in the docking base. The yellow light indicates the wheelchair is NOT fully engaged with the docking base. The user must exit the docking base and re-attempt until fully engaged.

The flashing red light indicates the system has been deactivated for occasions where the docking base is not occupied by a wheelchair. The “deactivated” mode is only used when the docking system is NOT occupied by a wheelchair. The audible alarm and release are disabled in this mode. To release the wheelchair from the docking system; turn off the vehicle’s ignition and press the release switch. A Proven Record of Success...

At EZ Lock we refuse to cut corners when your safety is at stake. We use only the highest grade materials; from the sturdy all-steel construction of the docking base...to the refined, nearly "bullet-proof" control electronics.

Convenience is one thing, but confidence is quite another, and you can be confident that the EZ Lock has what it takes to protect you. The EZ Lock Wheelchair Docking System has demonstrated it's effectiveness countless times... in the test laboratory and on the street.